Text Size

G02: Wind Pressure Analysis

Ver. 3.0.14 2017/11/22
  • Fixed range check error.
Ver. 3.0.13 2017/06/14
  • On the calculation sheet, the 90 degree wind direction roof diagram was mistakenly plotted under the 180 degree section.
Ver. 3.0.12 2017/02/27
  • Surface roughness drop-down lists contained invalid entries, corrected.
Ver. 3.0.11 2016/09/01
  • Invalid numbers in the grid crashed Wind, fixed.
  • License file error crashed Wind, fixed.
Ver. 3.0.10 2016/07/28
  • Range check error when interpolating wall pressures fixed.
  • Module now uses a period as decimal separator exclusively.
Ver. 3.0.09 2016/07/19
  • Occasional log file access error fix.
Ver. 3.0.08 2016/07/05
  • SABS 0160 - Interpolated roof pressures at the bottom of a range (height ratio or angle) caused a range check error.
  • File checking added when input originates from Frame.
Ver. 3.0.07 2016/06/21
  • Invalid wind code data produced a range check error, corrected.
  • Changing code of practice now sets a default wind speed if the previous value was invalid.
Ver. 3.0.06 2016/06/20
  • Changed user interface.
  • Added pressure diagrams.
  • Added additional calcsheet output.
  • Roof friction erroneously defaulted to the smooth condition, corrected.
Ver. 3.0.05 2016/04/06
  • Compatibility problem with large fonts, fixed.
Ver. 3.0.04 2016/02/03
  • Recompiled.
Ver. 3.0.03 2016/02/03
  • Range check error when opened from Frame fixed.
Ver. 3.0.02 2016/01/06
  • Occasional range check error during start up, fixed.
Ver. 3.0.01 2015/12/09
  • Correction of licensing error introduced by maintenance release.
Ver. 3.0.00 2015/12/01
  • Major release.
  • Implemented new user interface library.
Ver. 2.6.03 2014/09/02
  • A computational factor error for code SABS 0160 - 1989 was discovered.
  • The error was conservative for a Mean Return Period <= 50 years.
Ver. 2.6.02 2013/03/13
  • Fixed link to Help file.
Ver. 2.6.01 2013/02/01
  • Added a check when an invalid design code is used.
Ver. 2.6.00 2012/12/05
  • Maintenance release.
Ver. 2.5.01 2012/08/01
  • Maintenance release.
Ver. 2.5.00 2010/07/05
  • New Release.
Ver. 2.4.06 2010/04/13
  • Building diagram in Wind Pressures fixed for Monopitched roof.
Ver. 2.4.05 2009/07/14
  • Return period problem fixed.
Ver. 2.4.04 2008/09/18
  • Recompiled for compatibility with Linux servers.
Ver. 2.4.03 2008/07/31
  • Extrude unit fixed.
Ver. 2.4.02 2008/07/21
  • Cpi case 3 description adapted.
Ver. 2.4.01 2008/04/01
  • Display of graph values fixed.
Ver. 2.4.00 2008/03/25
  • Maintenance release.
Ver. 2.3.02 2008/02/25
  • -.
Ver. 2.3.01 2008/01/30
  • Individual CPi values for wind directions.
  • kp value error fixed for Qz calc.
  • 3d Pics changed to OpenGL.
Ver. 2.3.00 2007/03/12
  • Prokon Ver 2.3.00.
Ver. 2.2.04 2006/10/20
  • Terrain category 3&4 error corrected.
Ver. 2.2.03 2006/08/25
  • Wind profile return period corrected.
Ver. 2.2.02 2006/08/04
  • Surface pressure functionality added (SABS 0160 only).
Ver. 2.2.01 2006/05/25
  • If general preferences set to CP3 - 1972 - still defaulted to SABS0160 code.
Ver. 2.2.00 2005/12/15
  • Maintenance release.
Ver. 2.1.01 2004/09/29
  • Qz @ height on picture did not change if a height change was made and the height remained less than 10 m.
Ver. 2.1.00 2004/09/14
  • Maintenance release.
Ver. 2.0.00 2003/08/05