Ver. 3.0.03 2016/04/06
- Compatibility problem with large fonts, fixed.
|
Ver. 3.0.02 2016/01/06
- Occasional range check error during start up, fixed.
|
Ver. 3.0.01 2015/12/09
- Correction of licensing error introduced by maintenance release.
|
Ver. 3.0.00 2015/12/01
- Major release.
- Implemented new user interface library.
|
Ver. 2.6.04 2015/02/27
- Removed ability to select unsupported codes.
|
Ver. 2.6.03 2015/02/26
- Additional check for class 1 I sections in SABS 0162-1993 corrected.
|
Ver. 2.6.02 2013/10/10
- Menu item for changing code of practice, fixed.
|
Ver. 2.6.01 2013/07/17
- Calcsheets were not updated after code change.
|
Ver. 2.6.00 2012/12/05
|
Ver. 2.5.00 2010/07/05
|
Ver. 2.4.10 2010/06/21
- Handling of taper sections for SABS 0162-1993 corrected.
|
Ver. 2.4.09 2009/11/04
- SABS 0162 - 1993 now automatically selected if default steel code not yet supported.
|
Ver. 2.4.08 2009/10/21
- "Divide by zero" error fixed if w2 omitted for SABS0160 - 1993 code.
|
Ver. 2.4.07 2009/04/03
- Calculation of effective flange width for class 4 flanges, fixed.
|
Ver. 2.4.06 2009/02/27
|
Ver. 2.4.05 2009/01/27
- Recompiled for compatibility with quest user configurations.
|
Ver. 2.4.04 2009/01/19
- Disabled unsupported design codes in code selection window.
|
Ver. 2.4.03 2008/09/18
- Recompiled for compatibility with Linux servers.
|
Ver. 2.4.02 2008/04/04
|
Ver. 2.4.01 2008/04/01
- Fixed display of scroll values on graphs.
|
Ver. 2.4.00 2008/03/25
|
Ver. 2.3.03 2007/10/19
- Corrected OK/Fail flag for BS5950 - 2000 section. 4.8.3.3.1.
|
Ver. 2.3.02 2007/10/19
- Corrected influence of pcx and pcy for BS5950 - 2000 code.
|
Ver. 2.3.01 2007/04/24
|
Ver. 2.3.00 2007/03/12
|
Ver. 2.2.02 2007/02/02
- Increased no. of sections the program can handle to avoid range check errors when working with complex beams.
|
Ver. 2.2.01 2006/08/25
- Increased number of lateral restraints to 100 (up from 20).
|
Ver. 2.2.00 2005/12/15
|
Ver. 2.1.03 2005/12/06
- Bending stress on tension flange also shown.
|
Ver. 2.1.02 2005/04/29
- Calculation of class in BS5950-2000 corrected.
|
Ver. 2.1.01 2005/04/14
- Program reported an error if m and n were not set in BS5950 - 2000 although they are not required for this code.
|
Ver. 2.1.00 2004/09/14
|
Ver. 2.0.01 2004/03/11
- Output graphs sometimes not completely drawn on the RHS.
|
Ver. 2.0.00 2003/05/08
|