Text Size

S06: Plate Girder Design

Ver. 3.0.03 2016/04/06
  • Compatibility problem with large fonts, fixed.
Ver. 3.0.02 2016/01/06
  • Occasional range check error during start up, fixed.
Ver. 3.0.01 2015/12/09
  • Correction of licensing error introduced by maintenance release.
Ver. 3.0.00 2015/12/01
  • Major release.
  • Implemented new user interface library.
Ver. 2.6.04 2015/02/27
  • Removed ability to select unsupported codes.
Ver. 2.6.03 2015/02/26
  • Additional check for class 1 I sections in SABS 0162-1993 corrected.
Ver. 2.6.02 2013/10/10
  • Menu item for changing code of practice, fixed.
Ver. 2.6.01 2013/07/17
  • Calcsheets were not updated after code change.
Ver. 2.6.00 2012/12/05
  • Maintenance release.
Ver. 2.5.00 2010/07/05
  • New Release.
Ver. 2.4.10 2010/06/21
  • Handling of taper sections for SABS 0162-1993 corrected.
Ver. 2.4.09 2009/11/04
  • SABS 0162 - 1993 now automatically selected if default steel code not yet supported.
Ver. 2.4.08 2009/10/21
  • "Divide by zero" error fixed if w2 omitted for SABS0160 - 1993 code.
Ver. 2.4.07 2009/04/03
  • Calculation of effective flange width for class 4 flanges, fixed.
Ver. 2.4.06 2009/02/27
  • Range check error fixed.
Ver. 2.4.05 2009/01/27
  • Recompiled for compatibility with quest user configurations.
Ver. 2.4.04 2009/01/19
  • Disabled unsupported design codes in code selection window.
Ver. 2.4.03 2008/09/18
  • Recompiled for compatibility with Linux servers.
Ver. 2.4.02 2008/04/04
  • Range check error fixed.
Ver. 2.4.01 2008/04/01
  • Fixed display of scroll values on graphs.
Ver. 2.4.00 2008/03/25
  • Maintenance release.
Ver. 2.3.03 2007/10/19
  • Corrected OK/Fail flag for BS5950 - 2000 section. 4.8.3.3.1.
Ver. 2.3.02 2007/10/19
  • Corrected influence of pcx and pcy for BS5950 - 2000 code.
Ver. 2.3.01 2007/04/24
  • Fixed range check error.
Ver. 2.3.00 2007/03/12
  • Prokon Ver 2.3.00.
Ver. 2.2.02 2007/02/02
  • Increased no. of sections the program can handle to avoid range check errors when working with complex beams.
Ver. 2.2.01 2006/08/25
  • Increased number of lateral restraints to 100 (up from 20).
Ver. 2.2.00 2005/12/15
  • Version 2.2 released.
Ver. 2.1.03 2005/12/06
  • Bending stress on tension flange also shown.
Ver. 2.1.02 2005/04/29
  • Calculation of class in BS5950-2000 corrected.
Ver. 2.1.01 2005/04/14
  • Program reported an error if m and n were not set in BS5950 - 2000 although they are not required for this code.
Ver. 2.1.00 2004/09/14
  • Version 2.1 released.
Ver. 2.0.01 2004/03/11
  • Output graphs sometimes not completely drawn on the RHS.
Ver. 2.0.00 2003/08/05