Text Size

S11: Base Plate Design

Ver. 3.0.29 2017/10/24
  • Fixed saving of workshop drawing.
Ver. 3.0.28 2017/09/11
  • Fixed loading of circular hollow sections.
Ver. 3.0.27 2017/08/23
  • Added checks for division by 0 in FOS calculations.
Ver. 3.0.26 2017/08/04
  • Updated Eurekalog version.
Ver. 3.0.25 2017/06/21
  • Fixed bug with large circular sections and thin base plate.
Ver. 3.0.24 2017/06/20
  • Fixed bug with section descriptions in Section Database.
Ver. 3.0.23 2017/05/23
  • Fixed loading of files without Section ID.
Ver. 3.0.22 2017/04/26
  • Enabled bug reporting.
Ver. 3.0.21 2017/04/21
  • Further fixes for FOS for Eurocode.
Ver. 3.0.20 2017/04/20
  • Fixed Bolt Layout Wizard errors for custom bolt configurations.
  • Fixed bug when saving.
  • Fixed FOS on Bolt Shear + Tension.
Ver. 3.0.19 2017/03/24
  • Rectangular Hollow Section with small radius problem fixed.
Ver. 3.0.18 2017/03/22
  • Column offset problem when using Frame Design Link, fixed .
Ver. 3.0.17 2017/03/03
  • Color selector fixed.
Ver. 3.0.16 2017/03/03
  • Save section coordinates to file. Duplicate custom section node weld error fixed.
Ver. 3.0.15 2017/02/13
  • Bolt tension and Compression improved.
Ver. 3.0.14 2017/02/10
  • Bolt tension and shear combination loading calcsheet equation improved.
Ver. 3.0.12 2017/01/13
  • Layout prediction corrected.
Ver. 3.0.11 2017/01/13
  • pen/Save errors corrected.
Ver. 3.0.10 2016/11/23
  • Bolt base plate interaction crash corrected.
Ver. 3.0.09 2016/11/21
  • Exception report corrected. Material properties improved input.
Ver. 3.0.08 2016/11/01
  • Maintenance release.
Ver. 3.0.07 2016/04/06
  • Compatibility problem with large fonts, fixed.
Ver. 3.0.06 2016/03/24
  • Exception report error corrected. Bolt in compression calculation error corrected.
Ver. 3.0.05 2016/03/14
  • Error list checks corrected. Examples improved. Bolt layout allowing for offset.
Ver. 3.0.04 2016/03/08
  • Occasional acces violations, fixed. Help files added. FOS concrete improved. Combination loads accepted. Column and BasePlate offset now allowed. Memory Leaks removed. Loads grid improved.
Ver. 3.0.03 2016/01/06
  • Occasional range check error during start up, fixed.
Ver. 3.0.02 2015/12/09
  • Help file updated.
Ver. 3.0.01 2015/12/09
  • Correction of licensing error introduced by maintenance release.
Ver. 3.0.00 2015/12/01
  • Major release.
  • Implemented new user interface library.
Ver. 2.6.05 2014/10/24
  • Occasional convergence problem fixed.
Ver. 2.6.04 2014/04/02
  • Underestimated weld size of negative moment - fixed.
Ver. 2.6.03 2014/01/20
  • Increased the number of supported load cases to 500.
Ver. 2.6.02 2013/06/26
  • Increased the number of supported load cases to 200.
Ver. 2.6.01 2013/03/04
  • Added drawing info to output file for use in Revit.
Ver. 2.6.00 2012/12/05
  • Maintenance release.
Ver. 2.5.05 2010/10/18
  • Occasional file access error fixed.
Ver. 2.5.04 2010/10/15
  • Occasional "List index out of bounds" error fixed.
Ver. 2.5.03 2010/08/16
  • Error messages shortened for visibility.
Ver. 2.5.02 2010/07/22
  • Corrected orientation of RHS columns stored in data file.
Ver. 2.5.01 2010/07/05
  • SANS10162-1 2005 added.
Ver. 2.5.00 2010/07/05
  • New Release.
Ver. 2.4.07 2010/06/15
  • Problem with section designation exceeding 11 characters fixed.
Ver. 2.4.06 2009/04/03
  • Loads table can now span multiple pages on calcsheet.
Ver. 2.4.05 2009/03/25
  • Max bolt diameter increased from 64 to 200mm.
Ver. 2.4.04 2009/03/20
  • Improvements to output drawing.
Ver. 2.4.03 2009/02/05
  • Problem fixed where program gets stuck in a loop if connection is overstressed.
Ver. 2.4.02 2008/09/18
  • Recompiled for compatibility with Linux servers.
Ver. 2.4.01 2008/04/01
  • Fixed display of scroll values on graphs.
Ver. 2.4.00 2008/03/25
  • Maintenance release.
Ver. 2.3.00 2007/03/12
  • Prokon Ver 2.3.00.
Ver. 2.2.04 2006/10/10
  • Corrected initialization of design code.
Ver. 2.2.03 2006/03/31
  • Forces underestimated under pur tension with no moments -fixed.
Ver. 2.2.02 2006/02/27
  • Error message re bolt distances fixed.
Ver. 2.2.01 2006/02/14
  • Added errors to error checking: bolts must lie well outside of column face - else configuration falls outside of assumptions used.
Ver. 2.2.00 2005/12/15
  • Version 2.2 released.
Ver. 2.1.00 2004/09/14
  • Maintenance release.
Ver. 2.0.06 2004/03/05
  • Bolt forces for stiffened and unstiffened cases were swapped on the output sketches.
Ver. 2.0.05 2004/02/04
  • Bolt forces on Calcsheets did not always match those on the design page if more than one load case was specified.
Ver. 2.0.04 2003/10/23
  • Bolt sizes were the same for 2,3 and 4 bolts.
Ver. 2.0.03 2003/10/07
  • Bolt forces on Right hand side showed 0 if moments were negative. Bolt sizes were OK.
Ver. 2.0.02 2003/10/06
  • Bolt force problem from version 2.0.01 still acurred in some instances - corrected.
Ver. 2.0.01 2003/09/23
  • Bolt forces on diagram were given per bolt - now total bolt force one one side is given for clarity.
  • In full tension, bolts sometimes gave value for 3 bolts/side for 2 bolts/side case.
Ver. 2.0.00 2003/08/05