Text Size

S12: Beam Column Connection Design

Ver. 3.1.00 2018/09/28
  • Version 3.1 released.
Ver. 3.0.06 2016/12/06
  • Fixed resistance factor used in Tensile strength calculation for SANS 10162 - 2005.
Ver. 3.0.05 2016/06/03
  • Fixed selection problem on Settings dialog.
Ver. 3.0.04 2016/05/17
  • Fix problem with Check 1 on BS5950 - 2000.
Ver. 3.0.03 2016/04/06
  • Compatibility problem with large fonts, fixed.
Ver. 3.0.02 2016/01/06
  • Occasional range check error during start up, fixed.
Ver. 3.0.01 2015/12/09
  • Correction of licensing error introduced by maintenance release.
Ver. 3.0.00 2015/12/01
  • Major release.
  • Implemented new user interface library.
Ver. 2.6.04 2015/07/10
  • Fixed unit conversion error with Eurocode 3 - 2005.
Ver. 2.6.03 2014/11/27
  • Fixed loads not always reading correctly from saved file.
Ver. 2.6.02 2014/11/21
  • Added support for Eurocode 3 - 2005.
Ver. 2.6.01 2013/01/16
  • Recompiled to allow binary compression.
Ver. 2.6.00 2012/12/05
  • Maintenance release.
Ver. 2.5.03 2010/10/21
  • Eurocode prying altered, custom section support improved.
Ver. 2.5.02 2010/08/20
  • Changed Temporary folder location.
Ver. 2.5.01 2010/08/05
  • Corrected Eurocode specification on startup.
Ver. 2.5.00 2010/07/05
  • New Release.
Ver. 2.4.05 2009/08/05
  • Output updated for buckling calcs in BS2000.
Ver. 2.4.04 2009/06/15
  • Output updated to conform to calcs for BS2000.
Ver. 2.4.03 2009/01/27
  • Recompiled for compatibility with quest user configurations.
Ver. 2.4.02 2009/01/07
  • Material factor corrected for SANS 10162:2005 Check 1 Output.
Ver. 2.4.01 2008/09/18
  • Recompiled for compatibility with Linux servers.
Ver. 2.4.00 2008/03/25
  • Maintenance release.
Ver. 2.3.02 2007/08/24
  • Shear test for combined shear of grade 8.8 in Eurocode bolt rectified.
Ver. 2.3.01 2007/07/16
  • Optimisation of End Plate width fixed.
Ver. 2.3.00 2007/03/09
  • Maintenance release.
Ver. 2.2.04 2007/02/28
  • Bolt shear fixed for AISC:LRFD in metric.
Ver. 2.2.03 2006/11/29
  • Bolt shear fixed for AISC:LRFD.
Ver. 2.2.02 2006/09/20
  • Loads now recalculated after deleting lines in loads grid with Ctrl-Y.
Ver. 2.2.01 2006/04/20
  • Design links problem sorted out.
Ver. 2.2.00 2005/12/15
  • Maintenance release.
Ver. 2.1.02 2005/09/23
  • Drawing problem: Backing plates from a previous run are now cleared.
Ver. 2.1.01 2004/09/28
  • Non drawing of erroneous input resolved on Drawing page.
Ver. 2.1.00 2004/09/14
  • Maintenance release.
Ver. 2.0.01 2003/09/30
  • Dimension discrepancy in drawing resolved.
Ver. 2.0.00 2003/08/05
  • Maintenance release.