File Repository and Module Versions
Below is a complete list of files available for download and current module version numbers: Use the “download” link to download a module.
Update Instructions:
- The recommended method for updating your PROKON software is using Live Update. However, if you experience problems using Live Update, you can perform a manual installation of module updates.
- Should you experience problems using Live Update, you can download and install updates manually: Download and install the Service Pack.
- Alternatively, to install one or more individual modules, use the links below to download the required module(s) on your hard drive. Then run PROKON and use the Install Downloads function on the Home tab to install the update.
All Downloadable Modules
Structural Analysis
Module | |||
---|---|---|---|
A01-64: Sumo Structural Modeller 64-bit |
4.0.05 | 07 Dec 2020 | Download |
A01-Lib-64: Sumo 64-bit Libraries |
4.0.01 | 23 Oct 2020 | Download |
A01: Sumo Structural Modeller 32-bit |
4.0.05 | 07 Dec 2020 | Download |
A01-Lib: Sumo 32-bit Libraries |
4.0.01 | 23 Oct 2020 | Download |
A01-Support: Sumo Support Files (32-bit and 64-bit) |
4.0.01 | 23 Oct 2020 | Download |
A03-64: Frame Analysis 64-bit |
4.0 | 15 Oct 2020 | Download |
A03: Frame Analysis 32-bit |
4.0.01 | 04 Dec 2020 | Download |
A05: Plane Stress/Plane Strain Analysis |
4.0 | 15 Oct 2020 | Download |
A11: Single Span/Cantilever Beam Analysis |
4.0.03 | 02 Nov 2020 | Download |
A12: Beam On Elastic Support Analysis |
4.0 | 15 Oct 2020 | Download |
Steel Connection Design
Module | |||
---|---|---|---|
S11: Base Plate Design |
4.0.02 | 07 Dec 2020 | Download |
S12: Beam Column Connection Design |
4.0.02 | 06 Jan 2021 | Download |
S13: Apex Connection Design |
4.0.02 | 06 Jan 2021 | Download |
S14: Hollow Section Connection Design |
4.0 | 15 Oct 2020 | Download |
S15: Bolt Group Design |
4.0 | 15 Oct 2020 | Download |
S16: Weld Group Design |
4.0 | 15 Oct 2020 | Download |
S17: Double Angle Cleat Connection Design |
4.0 | 15 Oct 2020 | Download |
S18: Fin Plate Connection Design |
4.0 | 15 Oct 2020 | Download |
S19: End Plate Connection Design |
4.0 | 15 Oct 2020 | Download |
S31: Anchor Design (Beta Version) |
0.0.03 | 11 Dec 2020 | Download |
Concrete Design
Module | |||
---|---|---|---|
C01: Continuous Beam/Slab Design |
4.0.02 | 27 Oct 2020 | Download |
C02: Captain: Prestressed Beam/Slab Design |
4.0 | 15 Oct 2020 | Download |
C04: Rectangular Slab Panel Design |
4.0.02 | 30 Oct 2020 | Download |
C11: Rectangular Column Design |
4.0.04 | 17 Nov 2020 | Download |
C12: Circular Column Design |
4.0.03 | 17 Nov 2020 | Download |
C13: General Column Design |
4.0.05 | 17 Dec 2020 | Download |
C14: Concrete Retaining Wall Design |
4.0.03 | 11 Nov 2020 | Download |
C15: Concrete Base Design |
4.0.04 | 11 Nov 2020 | Download |
C21: Section Design For Crack Widths |
4.0.02 | 30 Oct 2020 | Download |
C22: Concrete Section Design |
4.0.01 | 21 Oct 2020 | Download |
C23: Punching Shear Design |
4.0.05 | 25 Nov 2020 | Download |
Timber Design
Module | |||
---|---|---|---|
T01: Timber Member Design |
4.0 | 15 Oct 2020 | Download |
Geotechnical Analysis
Module | |||
---|---|---|---|
E01: Generalised Slope Analysis |
4.0 | 15 Oct 2020 | Download |
E02: Generalised Non-Circular Slip Analysis |
4.0 | 15 Oct 2020 | Download |
E03: Tetrahedral Wedge Analysis |
4.0 | 15 Oct 2020 | Download |
E04: Planar Failure In Rock Slopes |
4.0 | 15 Oct 2020 | Download |
E11: Bearing Capacity Of Shallow Foundations |
4.0 | 15 Oct 2020 | Download |
E12: Shear Strength Of Jointed Rock Masses |
4.0 | 15 Oct 2020 | Download |
E13: Shear Strength Of Rough Joints In Rocks |
4.0 | 15 Oct 2020 | Download |
E14: Pile Design |
4.0.01 | 13 Nov 2020 | Download |
PROKON System
Module | |||
---|---|---|---|
Prokon32: PROKON Calcpad |
4.0.06 | 11 Jan 2021 | Download |
LM: PROKON License Manager |
4.0.01 | 25 Oct 2020 | Download |
LM30: PROKON License Manager for PROKON 3.0 |
3.0.47 | 25 Oct 2020 | Download |
Material: Material Database |
4.0.01 | 16 Nov 2020 | Download |
Sections: Section Database |
4.0.02 | 13 Nov 2020 | Download |
Eurocode: Eurocode Configuration Utility |
4.0 | 15 Oct 2020 | Download |
ProCalc: PROKON Calculator |
3.1.01 | 23 Aug 2019 | Download |
ProEdit: PROKON Text Editor |
4.0 | 15 Oct 2020 | Download |
PPrint: PROKON Print Previewer |
3.1.00 | 28 Sept 2018 | Download |
DwgEngine: Prokon DWG Engine |
11.0 | 3 Nov 2011 | Download |
DwgEngine-64: Prokon DWG Engine 64-bit |
11.0 | 3 Nov 2017 | Download |
Venim: Venim Mesher |
3.0.00 | 31 Aug 2017 | Download |
Venim-64: Venim Mesher 64-bit |
3.0.00 | 31 Aug 2017 | Download |
Taucs: Taucs Solver |
2.5.00 | 1 July 2010 | Download |
SMLIB: Solid Modelling Library |
2.5.00 | 1 July 2010 | Download |
CIS: CIS/2 Interoperability Library |
3.1.03 | 04 Dec 2020 | Download |
CIS-64: CIS/2 Interoperability Library 64-bit |
11 Mar 2020 | Download |
Technical Support
Module | |||
---|---|---|---|
ProkonSupport: TeamViewer Remote Assistance |
5.2 MB | 18 Aug 2015 | Download |
Water Network Analysis
Module | |||
---|---|---|---|
D05: Pronet for AutoCAD® Civil 3D 2018 to 2020 |
3.1.06 | 11 Sept 2019 | Download |